TECHNICAL DATA SHEET
PF030713
WEIGHT (kg)
2
(4.4 lb)
COVERAGE
n/a
ft2 per container
AMBIENT TEMP
95 °F
32 °F
(0 - 35 °C)
SUBSTRATE TEMP
122 °F
32 °F
(0 - 50 °C)
POT LIFE
20
minutes
at 68 °F (20 °C)
RAIN PROOF
30
minutes
at 68 °F (20 °C)
NEXT LAYER
60
minutes
at 68 °F (20 °C)
FULLY CURED
3
hours
at 68 °F (20 °C)
ALSAN RS DETAILER
ORDER NO.: L-RS016 (pebble grey)
DESCRIPTION
Alsan RS Detailer is a micro-fiber enhanced rapid-curing polymethyl methacrylate flashing paste. Alsan RS
Paste is used for waterproofing small and difficult penetrations where a standard Alsan RS fully reinforced liquid
membrane is not able to be applied.
PREPARATION
Using a slow-speed (200 to 400 rpm) mechanical agitator, mix the entire container of resin for two minutes before
each use, and prior to pouring off paste into a second container if batch mixing. Catalyze only the amount
of material that can be used within 10-15 minutes. Add pre-measured catalyst to the resin component, stir for
two minutes and apply to substrate.
Refer to catalyst mixing chart for additional information.
APPLICATION
Alsan RS Detailer is applied with a brush or spatula.
See published specifications and approved details.
PACKAGING
Alsan RS Detailer is available in resealable 2 kg cans.
STORAGE
Always store closed containers in cool, ventilated and dry location away from heat and oxidizing agent. Do
not store in direct sunlight or in temperatures below 32 °F (0 °C) or above 77 °F (25 °C). Approximate shelf life is
twelve months from date of manufacture when properly stored, sealed and unmixed.
HANDLING
Do not smoke. Keep away from open fire, flame or any ignition source. Vapors may form explosive mixtures
with air. Avoid skin and eye contact with this material. Avoid breathing fumes. Do not eat, drink or smoke in
the application area.
Consult the Material Safety Data Sheet for additional information pertaining to this product.
1.800.356.3521
www.soprema.us
TECHNICAL DATA SHEET
ALSAN RS DETAILER
Page 2 of 2
CATALYST MIXING CHART
4% Catalyst 32 °F to 49 °F (0 °C to 10 °C) 2% Catalyst 50 °F to 95 °F (10 °C to 35 °C)
Resin quantity kg TBSP 0.1 kg Packets kg TBSP 0.1 kg Packets
1.0 kg 0.04 4 n/a 0.02 2 n/a
2.0 kg 0.08 8 n/a 0.04 4 n/a
COVERAGE RATES
kg / ft2 kg / m2
Minimum consumption 0.28 3.0
Coverage rates may vary depending on substrate conditions.
